[TR] Locating dowel pins

Randall tr3driver at ca.rr.com
Tue Jul 15 11:57:55 MDT 2008


> Anyone have any suggestions as to how to remove the old
> pins?

Only the obvious ones of vice grips, etc.  The original pins are usually
soft enough that you can drill and tap them (as a last resort), but if
someone has replaced them with aftermarket pins, they may be too hard for
that.

> Am assuming one can purchase drill rod in the right diameter and cut to
> proper length for replacements?

That will work, although you can also buy ready-made pins.

Randall


More information about the Triumphs mailing list