[TR] Soldered Wire Connections in Cars

Bob Danielson 75TR6 at tr6.danielsonfamily.org
Fri Jul 11 18:44:40 MDT 2008


 Fred,
When I did my harness, Dan recommended the crimp and solder technique along
with heat shrink tubing. Even on the bullets that I secured with the million
dollar British Wiring bullet crimping tool, I also soldered them per Dan's
instructions.

Bob

Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org 


-----Original Message-----
From: triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net
[mailto:triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net] On
Behalf Of FRED E THOMAS
Sent: Friday, July 11, 2008 7:52 PM
To: MMoore8425 at aol.com; Brian.L.Jones at gsk.com; triumphs at autox.team.net
Subject: Re: [TR] Soldered Wire Connections in Cars

I received a phone call one day from Dan Masters to come down to his home in
Tenn, he had designed a wiring harness just for my T/R 3 with the
accessories installed, this was the beginning of his wiring harness business
(Advanced Wiring), and he himself using his kit rewired my entire car, but
he also ==soldered== each and every connection with the harness as he went
along and then used heat shrink tubing on each soldered end, almost 15 years
ago, in that length of time had one wiring problem and that was a stupid act
by the driver/owner, anyway, always soldered all wiring connections, you'll
be glad you did down the road.  "FT" 
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as 75tr6 at tr6.danielsonfamily.org

http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.4.7/1545 - Release Date: 7/10/2008
6:43 PM


More information about the Triumphs mailing list