[TR] hub pullers

[Ibsen Dow]

Hi Randall,

If you can send me a copy of the plans for the hub puller that you said that
could be made out of heavy pipe flanges, I would be very appreciative.
I assuming it work for the TR3 as well as other TRs.
Sincerely,
Ibsen
  ----- Original Message -----
  From: Randall
  Cc: triumphs at autox.team.net
  Sent: Thursday, July 10, 2008 11:40 PM
  Subject: Re: [TR] hub pullers


  > I'm not
  > sure if you knew that the hubs were produced at my local
  > Career Tech Center by the students as a project, which made
  > them pretty affordable

  I've got your plans Tony, and a lathe, but haven't stumbled across a
  suitable chunk of steel yet.  Any suggestions on where to find one cheap ?

  And for anyone who is interested, I have a copy of an article originally
  written by Eugene Wellenstein (but apparently no longer on the web) about
  how he made a hub puller from some heavy pipe flanges and other hardware
  items, with only simple machining and no welding.  PDF format, about 3/4
  meg.

  Randall
  _______________________________________________

  Support Team.Net  http://www.team.net/donate.html

  This list supported in part by the Vintage Triumph Register
  http://www.vtr.org


  Triumphs at autox.team.net
  http://autox.team.net/mailman/listinfo/triumphs

  You are subscribed as flashtr3 at cox.net

  http://www.team.net/archive