[TR] Detaching header from tailpipe

[Lee&John Howard]

Thanks. I'll give a try and report back.
John

On Thu, Feb 28, 2008 at 3:24 PM, Randall <tr3driver at ca.rr.com> wrote:

> > I'd like to get the header out for a ceramic coating, but, of
> > course, can't
> > budge it from its junction with the tail pipe. Many applications of
> > rust-bust stuff hasn't helped. Is there a way to get them
> > apart without cutting?
>
> Not always.
>
> > Do I apply a  propane torch?
>
> Should help, but don't forget that most "rust bust stuff" is flammable.
>  Get
> it good and hot, then try twisting the pipes.  Wrapping a wet towel around
> the part that goes inside (to create a temporary thermal gradient) may
> help
> too.  Once they start to move a little, dose with PB Blaster then keep
> twisting back and forth.
>
> Randall
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as leejohn7 at gmail.com
>
> http://www.team.net/archive