[TR] Steering Box Pitman Arm Torque

[DLylis at aol.com]

In a message dated 2/1/2008 11:46:47 P.M. Eastern Standard Time,  
mlang99 at comcast.net writes:

My  Standard Triumph shop manual doesn't provide a value for  this.



I first put a little teflon grease on the splines to reduce friction  and 
then I tightened mine down as hard as I could with the assembly held in a  vice.  
I then tapped the arm down on the splines to make sure all was  seated, and 
then tightened again.  Making sure the tab washer is tight  against the nut 
should do it.
 
David  Lylis
69 TR6 CC26160L
60 TR3A TS74461LO



**************Biggest Grammy Award surprises of all time on AOL Music.     
(http://music.aol.com/grammys/pictures/never-won-a-grammy?NCID=aolcmp003000000025
48)