[TR] TR head rebuild
Wiard Pless
wmpless at iprimus.ca
Fri Dec 5 13:25:54 MST 2008
My machine shop installed such a pipe plug into the cyl. head. Not the best looking
solution but it works. Wiard
From: "Randall" <tr3driver at ca.rr.com>
Subject: Re: [TR] TR head rebuild
To: <Triumphs at autox.team.net>
Message-ID: <08d801c95707$c74dc4c0$275636cc at jdnet.deere.com>
Content-Type: text/plain; charset="US-ASCII"
> > They pressure tested it and say there
> > is a very tiny leak around the edge of the aluminum plug that is located
> > under the valve cover in the center of the engine
>
I believe the racers remove the original plug (which is cast in place), and
then tap the hole for a pipe plug or similar. The leak very likely
indicates that the plug is corroded from below, so I wouldn't just ignore
the problem.
Randall
More information about the Triumphs
mailing list