[TR] 59 TR3A Steering Column

[Doug Mathews]

I do similar, but I use a long skinny dowel rod that has a little 
flex to tape a string to and use it to pull the string down the tube. 
Its smooth and easier for me I think. but hey, what works is what works!

Doug

At 07:24 AM 12/1/2008, DLylis at aol.com wrote:
>I
>fully assembled the wheel, stator tube, wires, on the bench, then  taken a
>coat hanger and straightened it out like a long spear, tied a string 
>to  one end,
>and shot it down the column and pulled it out so the string hangs out  on
>both ends.  Tie the wires with the string and one person guides 
>the  stator tube
>and the other pulls the string.