[TR] Triumph letter mounting TR4

[acekraut11 at aol.com]

 Or, scan it with a quarter, or ruler in the scan then you can verify the accuracy of the final printed document.? Using this method you could also accomplish the same thing with a digital photo instead of a scan.

Aaron


 


Aaron Cropley
71 TR6 (Throttle Body Injection!)
http://www.triumphowners.com/108
2002 Mini Cooper S
Topsham, Maine

 


 

-----Original Message-----
From: wbeech <wbeech at flash.net>
To: 308gtsi at adelphia.net; triumphs at autox.team.net
Sent: Fri, 22 Aug 2008 12:17 pm
Subject: Re: [TR] Triumph letter mounting TR4










You can scan it in.  

Be sure to write the measurements on the paper as the scan probably will not
be to scale after it is re-printed.   If it is too big for the scanner, you
could re-draw in 1/2 scale, then scan it.

Bill B
'58 TR-3A TS/30766 L
'59 TR-3A TS/64974 LO
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"


-----Original Message-----
From: triumphs-bounces+wbeech=flash.net at autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net at autox.team.net] On Behalf Of Brian
Induni
Sent: Friday, August 22, 2008 10:06 AM
To: triumphs at autox.team.net
Subject: Re: [TR] Triumph letter mounting TR4

Frank, et all -

I have a spare TR4A trunk lid I can make a hole pattern from. Getting it
from physical paper to electronic will be my biggest challenge... any ideas?

Brian
'67 TR4a

----------------------------------------------------------------------

Message: 1
Date: Thu, 21 Aug 2008 15:56:28 EDT
From: FGFO1 at aol.com
Subject: [TR] Triumph letter mounting TR4
To: triumphs at autox.team.net
Message-ID: <bc5.2f925332.35df226c at aol.com>
Content-Type: text/plain; charset="us-ascii"

I'm not sure I have the courage to try to drill such precisely placed holes,
but maybe there is a way.
 
 
I could accurately measure them and reproduce the pattern. If I had a TR4!
 
Frank Fisher
Temecula California