[TR] Triumph letter mounting TR4

wbeech wbeech at flash.net
Fri Aug 22 10:17:45 MDT 2008


You can scan it in.  

Be sure to write the measurements on the paper as the scan probably will not
be to scale after it is re-printed.   If it is too big for the scanner, you
could re-draw in 1/2 scale, then scan it.

Bill B
'58 TR-3A TS/30766 L
'59 TR-3A TS/64974 LO
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"


-----Original Message-----
From: triumphs-bounces+wbeech=flash.net at autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net at autox.team.net] On Behalf Of Brian
Induni
Sent: Friday, August 22, 2008 10:06 AM
To: triumphs at autox.team.net
Subject: Re: [TR] Triumph letter mounting TR4

Frank, et all -

I have a spare TR4A trunk lid I can make a hole pattern from. Getting it
from physical paper to electronic will be my biggest challenge... any ideas?

Brian
'67 TR4a

----------------------------------------------------------------------

Message: 1
Date: Thu, 21 Aug 2008 15:56:28 EDT
From: FGFO1 at aol.com
Subject: [TR] Triumph letter mounting TR4
To: triumphs at autox.team.net
Message-ID: <bc5.2f925332.35df226c at aol.com>
Content-Type: text/plain; charset="us-ascii"

I'm not sure I have the courage to try to drill such precisely placed holes,
but maybe there is a way.
 
 
I could accurately measure them and reproduce the pattern. If I had a TR4!
 
Frank Fisher
Temecula California
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as wbeech at flash.net

http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.6.6/1627 - Release Date: 8/22/2008
6:48 AM


More information about the Triumphs mailing list