[TR] Wiring locations

[Geo Hahn]

You may want to mention your commission number, I assume you have a LHD car.

Attached is a photo that shows the area around the control box.  In
this shot I had left the wires at there full length on the new harness
(so it looks a bit like a spaghetti bowl) but later got brave and
shortened them to look neater and more correct.

I think you can see how the harness comes thru and which hole took a
rubber plug.

To get the harness thru that grommet I made a collar out of a piece of
plastic milk bottle and formed it into a sort of funnel to squeeze the
wires thru whilst protecting them from the sheet metal.

Geo

On 8/4/08, AA00727 at aol.com <AA00727 at aol.com> wrote:
>
>  I need help with my TR 3 restoration! We are at the point of  installing the
> new wiring harness and don't have any good guidance on where the  different
> parts of the harness pass through the firewall,

[demime 1.01d removed an attachment of type image/jpeg which had a name of Volt Reg.JPG]