[TR] 74 TR6 Wiring Question
Chip19474 at aol.com
Chip19474 at aol.com
Sun Aug 3 08:46:37 MDT 2008
Harry,
I have a '76 TR6 which I've restored to mostly original spec....there's no
connector in the wiring harness below the brake servo/MC nor have I ever seen a
connector in this spot on the TR6 Carb versions. It's been awhile since
I've had a chance to look at a PI TR6 - maybe they use a factory connector in
the harness at that point for the PI system components. You didn't mention PI
so I assume you've got carbs buy maybe the car was originally fitted with
PI??
My wiring harness splits off with one direction towards the front of the car
(lights, coil, oil sender, horn, etc.) and the other split heads up to the
fuse block but no connector.....if you can take a digital pic and send it to me
off line, I could ID it for you.
Chip Krout
Delaware Valley Triumphs, Ltd.
Skippack, PA
1976 TR6 CF57822U
In a message dated 8/2/2008 9:20:26 P.M. Eastern Daylight Time,
Harrymague at aol.com writes:
In the main wiring harness, under the brake and
clutch master cylinders, there is an electrical connector with six wires.
**************Looking for a car that's sporty, fun and fits in your budget?
Read reviews on AOL Autos.
(http://autos.aol.com/cars-BMW-128-2008/expert-review?ncid=aolaut00050000000017 )
More information about the Triumphs
mailing list