[TR] Alignment specs

[tom white]

what is a Manco guage?

Best regards,
Tom

> Date: Sun, 27 Apr 2008 21:01:32 -0400
> From: jmitch at snet.net
> To: 6pack at autox.team.net; triumphs at autox.team.net
> Subject: [TR] Alignment specs
>
>   Actually I should have said I have excessive toe-out.  I measure about 5
degree toe out on my Manco gauge.   JM
>
>
>  I need to take the TR6 in for alignment as it appears I have
> excessive toe in.  The right front wheel seems to be scrubbing the
> pavement on full left turns.  I have 205-70-15" tires on wire wheels and
> also have installed Goodparts rear trailing arm adjusters.  What specs
> should I ask for for front toe-in and rear camber angle.  The numbers in
> Bentley are for the car with 2 passengers on board and it won't be that
> way when it gets aligned. Any advice would be appreciated.   John
> Mitchell   76 TR6
> _______________________________________________
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as tswhitez123 at hotmail.com
>
> http://www.team.net/archive

_________________________________________________________________
Make i'm yours.  Create a custom banner to support your cause.
http://im.live.com/Messenger/IM/Contribute/Default.aspx?source=TXT_TAGHM_MSN_
Make_IM_Yours