[TR] ZS 175

[Bob Danielson]

Randy,
I don't recall seeing any fingers on the plug on my ZS carbs.......or are
you talking about all the little metal prongs that go around the plug? The
last time I drained the bowl I just pried them out and then pressed them
back in.


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
http://tr6.danielsonfamily.org 


-----Original Message-----
From: triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net
[mailto:triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net] On
Behalf Of j randolph sandner
Sent: Sunday, April 20, 2008 2:18 PM
To: 6pack
Cc: tr6
Subject: [TR] ZS 175

afternoon to all,
my carb bowl is leaking at the plug on the bottom.
i have the new o-ring.
is it possible to gently pry out the plug w/o breaking off the fingers,
renewing the o-ring , and push the plug back in?
Or do i have to remove bowl, and 'close the fingers' from inside?
thanks
randy sandner
74.5 tr6
hickory nc
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as 75tr6 at tr6.danielsonfamily.org

http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG. 
Version: 8.0.93 / Virus Database: 269.23.2/1387 - Release Date: 4/19/2008
11:31 AM