[TR] surface TR3 exhaust manifold?

wbeech wbeech at flash.net
Tue Apr 8 23:58:25 MDT 2008


Jeremiah,

If the gasketed area is not perfectly flat, it can lead to a leak down the
road.  I should think any competent machine shop could check it to see if it
needs to be done and do it for you if necessary.

Bill 

Bill B
'58 TR-3A TS/30766 L
'59 TR-3A TS/64974 LO
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"


-----Original Message-----
From: triumphs-bounces+wbeech=flash.net at autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net at autox.team.net] On Behalf Of
Jeremiah Curry
Sent: Tuesday, April 08, 2008 10:06 PM
To: triumphs at autox.team.net
Subject: [TR] surface TR3 exhaust manifold?

Howdy all,
 
I am getting ready to put the exhaust manifold back on my TR3, it has been
off for 29 years and the head has been rebuilt.  A friend of mine told me I
should have the exhaust manifold surfaced before re-assembling.  It is not
rusted, but not perfectly clean either.  What are your thoughts? how much
can the gasket cover up?
 
If you think I should get it done, do you have a place in Salt Lake City
that could do it well?
 
thanks in advance,
Jeremiah
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as wbeech at flash.net

http://www.team.net/archive


More information about the Triumphs mailing list