[TR] Lucas's looseness limits lighting?

Don Spence dkspence at telus.net
Mon Apr 7 12:14:02 MDT 2008


Better yet, pull them apart, clean them, slip an inch and a half of  
heat shrink tubing over the wire, reconnect and shrink the tube to  
seal the joint.   Do as needed or as you have the energy.


On 7-Apr-08, at 12:00 PM, triumphs-request at autox.team.net wrote:

>
> From: Bill & AnnaBelle <anabil007 at comcast.net>
> Date: April 7, 2008 10:50:17 AM MDT (CA)
> To: TeriAnn Wakeman <twakeman at razzolink.com>, triumphs at autox.team.net
> Subject: Re: [TR] Lucas's looseness limits lighting?
>
>
> Wouldn't it be simpler, and  more  efficient in the long run to  
> just replace those lousy bullets with modern insulated spade  
> connectors? You wouldn't have to do it all at once, just replace  
> the bad ones as they failed, or pulled apart, broke, burned, gave  
> up, or just plain did not work.


More information about the Triumphs mailing list