[TR] Lucas's looseness limits lighting?

[tom white]

When I went through the wiring on my car I soldered every connector.  I also
shrink wrapped the wire to the connector so vibration would be reduced.  I
haven't had an electrical problem since.

Best regards,
Tom

> Date: Mon, 7 Apr 2008 06:10:21 -0700
> From: twakeman at razzolink.com
> To: triumphs at autox.team.net
> Subject: Re: [TR] Lucas's looseness limits lighting?
>
>   > The factory soldered the bullets on using a solder pot. I've tried
> > to solder a couple on with big Weller soldering gun and believe me,
> > crimping is way easier.
>
> The factory soldered them so I did too.  It is a slow process but I
> figure it eliminated internal space where corrosion might occur. And of
> course I also assembled the connectors with the dielectric grease to
> help keep moisture out.  And I never reused the female connectors as I
> do not have a good way to insure the internal corrosion is cleaned out.
>
> Teriann
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as tswhitez123 at hotmail.com
>
> http://www.team.net/archive

_________________________________________________________________
Pack up or back upuse SkyDrive to transfer files or keep extra copies. Learn
how.
hthttp://www.windowslive.com/skydrive/overview.html?ocid=TXT_TAGLM_WL_Refresh
_skydrive_packup_042008