[TR] Lucas's looseness limits lighting?

[TeriAnn Wakeman]

  > The factory soldered the bullets on using a solder pot. I've tried
> to solder a couple on with big Weller soldering gun and believe me,
> crimping is way easier.

The factory soldered them so I did too.  It is a slow process but I 
figure it eliminated internal space where corrosion might occur. And of 
course I also assembled the connectors with the dielectric grease to 
help keep moisture out.  And I never reused the female connectors as I 
do not have a good way to insure the internal corrosion is cleaned out.

Teriann