[TR] h/brake cable spring

[Scott Suhring]

John:

There should be a small metal tab that has a small hole in it that sticks
out from the under side of the rear shelf that the rear seat fits over. It
is behind where the floor pans are welded. The one end of the spring hooks
into this hole and the other end just attaches over the cable casing. It is
a taunt fit but holds it in place.

Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 TR3

-----Original Message-----
From: triumphs-bounces+suhringtr36=comcast.net at autox.team.net
[mailto:triumphs-bounces+suhringtr36=comcast.net at autox.team.net] On Behalf
Of John Gillis
Sent: Sunday, April 06, 2008 12:09 PM
To: Triumph List
Subject: [TR] h/brake cable spring

Quick one for TR2 - where along the h/brake cable (under the floorpan)  
does the spring go and to what does it attach at the other end, I am  
guessing its function is to keep the cable from snagging on  
projections on the road, like run-over dogs etc.
Regards
John
_______________________________________________