[TR] Exhaust weldiong.

[npaul72464 at aol.com]

 I used to have an MGB as my only car and kept pulling off the muffler as I hit driveways, etc.? So, I had the pipes just welded together without clamps.? Worked great.

Ned Paulsen
58 TR3
60 AH 3000

-----Original Message-----
From: Nolan <foxtrapper at aceweb.com>
To: triumphs at autox.team.net
Sent: Thu, 3 Apr 2008 10:44 am
Subject: Re: [TR] Exhaust weldiong.










JB Weld wouldn't be my choice.


----- Original Message ----- 
From: "tom white" <tswhitez123 at hotmail.com>
To: <triumphs at autox.team.net>
Sent: Thursday, April 03, 2008 10:28 AM
Subject: [TR] Exhaust weldiong.


> Hi List,
> 
> I am hanging new exhaust on my car.  I have decided to use "V-clamps" as
> connectors between the butt ends of the pipes.  These require welding a
> stainless steel ring onto the end of the pipe.  I am wondering if I could
> reliable install these rings with JB Weld instead of trying to weld the
> stainless to mild steel?
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as npaul72464 at aol.com

http://www.team.net/archive