[TR] PLASTIC 'beehive' stand-alone unit
Chris Simonsen
ccsimonsen at gmail.com
Fri Sep 7 11:40:22 MDT 2007
When I was rebuilding the TR2 with my dad (back in 1975), we bought trailer
running lights at kmart. We removed the lens and it fit w/chrome
rings just fine. Not original, but it got me running through 1979..... (oh
jezze - I've been hauling a non running car around with me for 28 years -
does that qualify me for an award?)
Parts were not so easy to find back then all I had was NAPA and a manual
back then. I didn't find TRF until 77 or so.....
On 9/5/07, hdrider570 at peoplepc.com <hdrider570 at peoplepc.com> wrote:
>
> I have fitted a set of aftermarket lens to original Bee Hive light
> bases. The lens base is slightly larger than the original. As such the
> lens will fit but the secondary chrome ring will not as the glass lens has
> pushed the rubber too far aou.
>
> Edward Hamer
> Petaluma CA
>
> ________________________________________
> PeoplePC Online
> A better way to Internet
> http://www.peoplepc.com
> _______________________________________________
> ccsimonsen at gmail.com
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
> Triumphs mailing list
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
More information about the Triumphs
mailing list