[TR] Triumphs Digest, Vol 1, Issue 308

[Don Spence]

Wayne
 From Memory, follow the instructions and remove the soft top ( rear  
plate first, then fold the top and remove the three screws from each  
side mount ).

  Install the "female" body mounts using the three screws that held  
the soft top to the body door post areas.  do NOT fully tighten yet.   
With a helper, place he hard top on to the car sliding the "male"  
pieces into the "female" mounts. Run the two bolts into the front of  
the HT at the windshield header. Leave loose. Run the two bolts at  
the rear of the hard top into the matching threaded holes in the rear  
deck. Tighten all progressively. Done.

The worst thing about it is you will now hear all the rumbles,  
creaks, groans and squeaks that were inaudible in an open car.

  Cheers
  Don