[TR] removal of fan extension and benevolent commercial message

[Bill & AnnaBelle]

I found it simpler to wedge the wrench on the frame, and  the hit 
the starter  button,  bolt comes  right out ...


>After a lot of good advice I have the fan extension off and replaced 
>with a Fan elimination kit from Rick Patten at TBI Conversions  
>http://www.Sidedrafttbi.com (NFI).  I was successful after heating up 
>the dog bolt with a propane torch & then using a 1 1/8' socket with 
>my electric impact wrench!
>
>I can send out a picture of the installed fan eliminator to anyone 
>who is interested in seeing it.
>
>Again thanks for the help
>


-- 
Bill  Pugh
1957 TR3 TS16765L
aka
Casper

AnnaBelle Pugh
1970 TR6 CC59179L
aka
Rosey
Wallace, CA