[TR] front clip reinstallation?

[THOMAS FANSHER]

If you feed a longer bolt up from the bottom and put a capture nut on it, 
the radiator then sits on the bolt and it's really easy to put lock washer 
and nut from the top side of the radiator. Feeding the bolt from the top and 
trying to start the nut from the bottom is much more problematic. In my 
opinion, it's a good fix. Pusher fan is good if you live in a warm climate -
Tom
61 TR3A
62 TR4
73 Stag

>    Actually, I do think I've heard of a suggestion and possibly might 
> follow
> it: it is to remove the radiator by lifting it off it's 3/16" mounting 
> bolts
> and replace them with 5/16" bolts as this makes something easier??  (This
> sounds like just creating an extra step!)
>
>    Is there anything I need to include or change since I've never done 
> this
> before?  It's been years since I disassembled the car.
>
> Thanks Much in advance,
> Paul Dorsey- 60 TR3
> _______________________________________________
> tfansher at comcast.net
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
> Triumphs mailing list
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs