[TR] TR3A Fan removal problem

[DLylis at aol.com]

John,
I could not even break mine free with an impact wrench.  So, I went to  Lowes 
and bought a 3' length of angle iron and drilled two holes near one end  that 
meet up with two threaded holes where the fan mounts.  I bolted this  on to 
the extension and lowered the block to the floor.  Using the  weight of the 
block to my favor and the angle iron lever against the floor, I  put an iron pipe 
on the end of a breaker bar and broke that bugger free.  
It was actually quite easy.
David  Lylis
69 TR6 CC26160L
60 TR3A TS74461LO



************************************** See what's new at http://www.aol.com