[TR] rewiring my TR3

[THOMAS FANSHER]

Solder is going to make a better connection in the long run and 45 years or 
so is a long run>
Tom
61 TR3   all soldered
62 TR4  will be soldered
73 Stag only if I have the time left
----- Original Message ----- 
From: "60TR3A" <60TR3A at cox.net>
To: "Triumph car discussion Sports" <Triumphs at autox.team.net>
Sent: Tuesday, October 16, 2007 8:18 PM
Subject: [TR] rewiring my TR3


>I am just getting started rewiring my TR3 with a Dan Master's kit.  I
> have completed the rear lighting system & the gas tank float.  I am
> now beginning the instrument panel.  There are a number of switches
> that have hole in which you insert the wire and then clamp it in
> place with the end of a machine screw.  My question is should one
> solder the end of the wire before clamping it or leave it unsoldered??
>
> Thanks
>
> John
>
> John A. Wise
> Glendale, AZ
>
> 1960 Triumph TR3A
> Commission No: TS80422L
> http://members.cox.net/60tr3a/
> http://www.triumphowners.com/876
>
> 1977 Porsche 911S
> http://members.cox.net/porsche911s/
> _______________________________________________
> tfansher at comcast.net
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
> Triumphs mailing list
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs