[TR] TR3A Alternator Conversion Bracket Problem

[terryrs at comcast.net]

If you're near Ukiah or Potter Valley, you're near where I grew up.

Not sure what you mean by "single point."  Is that a reference to the upper bracket?


-------------- Original message -------------- 
From: <tr3driver at ca.rr.com> 

> ---- Bill & AnnaBelle wrote: 
> > I went through those problems, and I believe the solution is a 
> > matter of physical science. 
> 
> FWIW, I tried the "single point" mount, and found out the hard way that it 
> didn't work very well. My solution was virtually identical to Bill's (except I 
> kept the wide belt); and it worked very well for several years. Belt life went 
> up noticeably. 
> 
> Randall - from a hotel room somewhere in northern CA 
> _______________________________________________ 
> 
> Support Team.Net http://www.team.net/donate.html 
> 
> This list supported in part by the Vintage Triumph Register 
> http://www.vtr.org 
> 
> http://www.team.net/donate.html 
> 
> Triumphs at autox.team.net 
> http://autox.team.net/mailman/listinfo/triumphs