[TR] TR6 Connecting Rods

[Wayne Lee]

Hi Listers,
     Below is a set of used Connecting Rods that are supposedly for a TR6 
that I bought on eBay. Upon seeing another set of Rods from someone who had 
documented their Engine rebuild I noticed theirs were different.
They had a hole in them centered right above the Big End and a recessed area 
with a constant radius above the hole running up between the Beam area of 
the rods. Can anyone help identify these as being from a TR6? I was 
concerned they might really be for a GT6. In the Manual they show a Rod 
looking like these but the hole isn't visible in the illustration. In a 
Rimmer Bros. Illustration though I did see the rod with the hole in it. I 
have this questioned raised over on the 6-pack website but haven't heard 
back yet except for the guy who had the pictures of his rebuild.
I bought these to have a set to prep and rework in anticipation of putting 
Rings in my Car next spring when my other Cyl. Head should be ready to go 
on.
Any feedback greatly appreciated!
Regards,
Wayne Lee
Douglas,MA
58 TR4
64 TR4
75 TR6

[demime 1.01d removed an attachment of type image/jpeg which had a name of f875_1.jpg]