[TR] TR2 start up update

[Geo & Kathleen Hahn]

Your pulley will probably pull free easily since presumably it was only 
recently fitted, but I always carry a little puller for that pulley in case 
it doesn't want to budge (or suddenly budges and careens into the 
radiator)...

http://www.cybertrails.com/~ahwahnee/waterpump.JPG

Then it is easy to remove the pump.  One can also remove the pump with the 
pulley in place but that is (as I recall) involves some wrench work which is 
a bit tedious.

Geo

----- Original Message ----- 
From: "John Gillis" <jgillis at tcd.ie>
To: "Triumph List" <triumphs at Autox.Team.Net>
Sent: Monday, November 12, 2007 8:30 AM
Subject: [TR] TR2 start up update


> ...Is it possible to fit a pump without
> removing the rad and nose?