[TR] Fall into the GAP

[wbeech]

I agree with your guess, the bead protrudes about 1/8" so if you get to 1/4"
on each side that will give you a finished clearance of 1/8".

Bill B
'58 TR-3A TS/30766 L
"I love it, she hates it... the car, of course!"
 

-----Original Message-----
From: triumphs-bounces+wbeech=flash.net at autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net at autox.team.net] On Behalf Of Paul
Dorsey
Sent: Saturday, November 10, 2007 7:06 AM
To: list Triumph
Subject: [TR] Fall into the GAP

How wide should I make the gaps on the sides of the bonnet? (This would be
before any beading or beading-cover is put in.)

I'm guessing a 1/4" on each side of the bonnet, but then, I've never owned
or rebuilt a Tr before.

Thanks, Paul Dorsey
60 Tr3
This list supported in part by the Vintage Triumph Register
http://www.vtr.org

http://www.team.net/donate.html

Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.503 / Virus Database: 269.15.28/1122 - Release Date: 11/10/2007
10:41 AM
 

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.503 / Virus Database: 269.15.28/1122 - Release Date: 11/10/2007
10:41 AM