[TR] was ballast resistor/ electronic ignition, now I was wrong and an apology
Nolan
foxtrapper at aceweb.com
Thu Nov 8 06:04:56 MST 2007
Yes, the box needs to be grounded. As well the steel leads need to be
clean.
If you're inquisitive, you can open that box and admire the bone stock GM
HEI ignition module sitting in it.
And as long as you're there, you can question my Triumph or Lucas or
whomever decided that the GM ignition needed a bunch of other gee-gaws
installed onto it. Personally, I disconnected the various capacitors and
resisters and such. Most were corroded into non-functionality anyways.
----- Original Message -----
From: "Tim Gaines" <mtgaines at mail.presby.edu>
To: <TRIUMPHS at autox.team.net>
Sent: Thursday, November 08, 2007 7:57 AM
Subject: Re: [TR] was ballast resistor/ electronic ignition,now I was wrong
and an apology
> ground problem. Am I correct in assuming that the module body is
> supposed to be grounded. I am going to try for a more permanent fix
> for this problem (not working right now again), but I want to be
> sure that grounding is the proper course of action.
More information about the Triumphs
mailing list