[TR] Pristine TR-4 hood availabe.

[C E White]

Ian,

I've a friend who is possibly interested in your short-bubble hood.  Please
contact me off-list at bn_knight at ameritech.net.  Thanks.

Chuck White
Xenia, OH
1965 TR4A IRS
1970 GT6+
 
-----Original Message-----
From: autox.team.net On Behalf Of Ian
Sent: Monday, November 05, 2007 12:02 PM
To: triumphs at autox.team.net
Subject: Re: [TR] Pristine TR-4 hood available.


I have both; a long bubble on the car as well as a short bubble (finishes
about 6 inches from the back) that is probably going onto eBay soon, unless
there is some interest amongst the true enthusiasts.

--
Ian
62 TR4

-----Original Message-----
From: autox.team.net On Behalf Of pethier at comcast.net
Sent: Monday, November 05, 2007 11:57 AM
To: jar at aldermanroad.net; triumphs at autox.team.net
Cc: jar7u at hscmail.mcc.virginia.edu
Subject: Re: [TR] Pristine TR-4 hood available.

> I was going through some of my assortment of parts, and find that I 
> have
> a pristine TR-4 hood. I'm not sure if it came off a -4 or 4A. Also, 
> there were the "short" carb bulge hoods, and the "long" bulge hoods. 
> Does anyone out there know the measurements for each?

No measurements should be needed, as the difference is quite obvious. 
On the long-bubble hood (bonnet), the bubble reaches all the way to the aft
end of the hood. 
In the more-rare early short-bubble hood, the bubble falls far short of the
rear of the hood.

I think all the TR4, TR4A, TR5, TR250 long-bubble hoods are the same, but
I'm no expert.