[TR] TR6 Wetness and starting

Donald Tennant dtennant at shaw.ca
Thu Jul 19 18:29:15 MDT 2007


It sounds like the solenoid hasn't engaged the drive and the starter 
motor is running. Connections in the solenoid switch wet?

Jack DeWolf wrote:
>> 1974 TR6 with SU carbs - otherwise stock. If the motor compartment 
>> is seriously wet, i.e. engine hosed off after degreasing, engaging 
>> the starter produces a whine or buzz from an electrical 
>> component  above the passenger footwell until the whole thing dries 
>> out (about 45 minutes or so) at which time the solenoid works 
>> normally again and all is well. When in 'whining mode" there is no 
>> click or indication that the solenoid is working. The sound only 
>> occurs when the key is in starter motor activation position. Any ideas as to:
>>     
>
> a) which component, relay or area's wetness causes this?
> b) what is whining and why?
> c) since it appears that the heavy positive cable goes directly from 
> the battery to the starter, where is the solenoid even located?
>
>
> Thanks in advance
>
>
>
> Jack 
> _______________________________________________
> dtennant at shaw.ca
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
> Triumphs mailing list
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs


More information about the Triumphs mailing list