[Tigers] Carburetor Question

[Gary Winblad]

Stu,
I suspect it is to "form" a good seat, the ball is a valve and it shouldn't
leak.
Gary W.

On Sat, Jul 11, 2026 at 5:34 PM Stu <sabre2tgr at gmail.com> wrote:

> I will be starting surgery on my stock 2 barrel tomorrow.  There's what
> seems to be an odd instruction concerning the accelerator pump discharge
> ball. The instruction says to use a brass drift and a hammer to seat the
> ball.  But the next instruction says the ball shall be free in the bore.
> What are you seating the ball in?   And if it's being seated in something,
> how can it be free?  Does it have to pop through some restriction
> or something?    Inquiring minds want to know...
>
> Stu
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/winbladgary@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20260712/ac652449/attachment.htm>