[Tigers] Clutch Master Cylinder II

[Mark Rense]

I’ve rebuilt several. The piston is retained by the domed part of the push
rod which is in turn held in via the circlip. There should be no gap. If
your piston is hanging up then it may be buggered inside the bore.


On Fri, Oct 20, 2023 at 10:45 PM Terry Packer via Tigers <
tigers at autox.team.net> wrote:

> Hi All
>
> Upon re-reading my previous post I think I failed to ask a straightforward
> question. Should the clutch master piston return the full length of the
> bore until it contacts the pushrod dome or is some space between the two
> normal/permissible?
>
> Thanks Again
> Terry
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/mark44124@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20231021/93ef02f4/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_6331.jpg
Type: image/jpg
Size: 68863 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20231021/93ef02f4/attachment-0001.jpg>