[Tigers] toureau stud

[GARY WINBLAD]

Put a small copper wire in the hole with your screw-in stud.  It will get a bite.  Then clip it short
and screw it down.  Has worked for me before.
Gary
 

> On 10/01/2023 3:49 PM PDT Clyde Mclaughlin <clydemclaughlin618 at gmail.com> wrote:
>  
>  
> Get a stud with #10 machine thread,  drill the hole to appropriate size, put a small punch through the hole and tap it, it will put a dent in the panel in the trunk underneath, then use a rota broach bit and make a 1/2" hole in that under panel, now you can install a nut and washer on the the treaded stud, maybe use some blue locktite or a nylock nut.  problem solved for good.
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20231001/e937f88e/attachment-0001.htm>