[Tigers] Hose clamps

[Ron Fraser]

It has been awhile since I reviewed this doc, so there could be some errors.

 

Radiator and Ford tower screw clamps come in a kit from Mustang catalogs.

Moss Motors has double wire clamps – you need to check their latest size listings.

PCV hose uses a single wire Corbin clamp.

Ron Fraser

 

Tiger hose clamps

Engine compartment

I’m making some guesses here on hose size; 12/14/09, 4/13/2021

No.         Position                                 Clamp Type           Part #                                     Hose size               Moss #

2              Header tank sm                    double wire          9782091 9/16” clamp         5/16 Hose             326-475

2              Header tank Lg                     double wire          9782201                                 1 1/8 H                  326-430

2              Upper radiator                     double wire          9782301 or 9782321          1 5/8 H                    031-724  

2              Lower radiator                     double wire          9782341                                 1 7/8 H - 1.95 OD

4              RHD lower radiator             double wire          9782341

2              Water pump to heater “T” double wire          9782151 or 9782161          5/8 Hose

2              Water bypass hose              Ford screw            97356-S                 5/8 Hose

2              Heater “T” fitting                 2 double wire      9782161                                5/8 hose                    635-060             

1              to heater core                      1/2 English band  P.43225 or 9788121           ½ Hose 

1              Water elbow on intake manifold      Ford screw   97356-S                          5/8 Hose

3              Temp sensor block              2 double wire       9782161                                5/8 Hose

1 English band      P.43225 or 9788121           ½” Hose 

2              Water valve                          English band         P.43225 or 9788121           ½” Hose 

2              Heater core                          English band         P.43225 or 9788121           ½” Hose

1              Hose to duckbill drain                         double wire                                          5/8 Hose

2              Hose to other duckbill drain             double wire clamp              

1              Carb spacer                           Ford Screw            97356-S                                5/8 Hose

1              Carb spacer water line       double wire          9782161                                5/8 Hose                635-060 

2              PCV hose                               single wire            6100669   Ford # 97331-S   ½” Hose

2              Air breather hose                double wire          9782141                                 5/8 hose               635-060

Brake servo

2              Vacuum line          Cotter pin strap clamp or wire                                          3/8 Hose

Fuel tanks

2              Filler neck             double wire          Hose OD = 2 9/16”              ID = 2.2    2 1/4

8              Balance tube        double wire          Hose OD = 2 1/16 ID = 1.7    1 3/4

2              Breather pipe       double wire          Hose OD = 9/16   

 

TBON pg 153 & 154            Norm Miller states

All ½” hose – CAD plated English band clamps

All 5/8” hose – CAD plated double wire clamps at all but 3 locations; (water pump, intake manifold elbow, carb spacer)

Water pump bypass – CAD plated Ford Screw clamp 2

Heater core return hose at elbow manifold fitting - CAD plated Ford Screw clamp

Upper and lower Radiator hoses – CAD plated double wire clamps

Expansion tank hose – CAD plated double wire clamps 

Expansion tank overflow hose – un-clamped

Fuel line at flexible connections – CAD plated double wire clamps

Oil filler cap breather hose – CAD plated double wire clamp at both ends

 

 

 

 

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of chris cthompson.net via Tigers
Sent: Tuesday, May 23, 2023 7:18 PM
To: tigers at autox.team.net
Subject: [Tigers] Hose clamps

 

My car, B382000331 is a 30 year old restoration.  It passed through Norm’s hands, who did a bit of work on it before selling it.  It won 2nd place in the original category on the west coast Tiger gathering just before I bought it from a feller in Hayward, CA.  It won’t win any concours today, but I’m still emphatic about keeping it original.  What I would like to do next is get all the hose clamps to be original configuration. Does anyone have a list of the clamp sizes/types used?  Or even better, a source of supply?  I’ve put together a partial list, and found some suppliers, but a lot is missing.

 

Thanks!  Chris

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20230523/087be0ca/attachment-0001.htm>