[Tigers] The Seat Project Continues

[Jeffery Randall]

Stu when you put the cover on, you will pull it tight around those edges
and the foam will compress and not be a problem.

On Sun, Mar 12, 2023 at 3:27 PM Ron Fraser <rfraser at bluefrog.com> wrote:

> Stu
>
>                 Are you looking only at the foam installed?
>
> Do a test fit with the upholstery installed to see if the seat cover pulls
> the foam into position.
>
>
>
> Ron Fraser
>
>
>
> *From:* Tigers <tigers-bounces at autox.team.net> *On Behalf Of *Stu
> *Sent:* Sunday, March 12, 2023 2:52 PM
> *To:* Tiger Net <Tigers at autox.team.net>
> *Subject:* [Tigers] The Seat Project Continues
>
>
>
> I've made some good progress and parts are starting to go back on.  All
> the screws came out with a little persuasion, chemical and physical.
>
>
>
>  But when trial fitting the bottom cushion, it appears that  it is a bit
> wider than the original, especially at the back.  The issue seems to be
> that the seatback latch lever will seriously rub against the upholstery
> when it's all together.  Has anyone else seen this?  Did you cut the foam
> back a bit or just live with it?
>
>
>
> Stu
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/jefferyrandall@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20230312/76344ea5/attachment.htm>