[Tigers] The Seat Project Continues

[Ron Fraser]

Stu

                Are you looking only at the foam installed?

Do a test fit with the upholstery installed to see if the seat cover pulls the foam into position.

 

Ron Fraser

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Stu
Sent: Sunday, March 12, 2023 2:52 PM
To: Tiger Net <Tigers at autox.team.net>
Subject: [Tigers] The Seat Project Continues

 

I've made some good progress and parts are starting to go back on.  All the screws came out with a little persuasion, chemical and physical.

 

 But when trial fitting the bottom cushion, it appears that  it is a bit wider than the original, especially at the back.  The issue seems to be that the seatback latch lever will seriously rub against the upholstery when it's all together.  Has anyone else seen this?  Did you cut the foam back a bit or just live with it?

 

Stu 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20230312/c9a896d9/attachment.htm>