[Tigers] EL52D Screw on Head light rim from SS

[Joel Martin]

Hello all!
Pulled up at a buddies garage and while we talking, I noticed the passenger side headlight ring in the wrong position.  It was ready to fall off.  So I removed it and the clip was broken and just fell out.  Dodged a bullet that this did not happen while driving.
Rick no longer carries the clip anymore and it is replaced with a screw on clip, screws not included.
Has anyone installed these on their cars and has done a write up procedure, Rick has not.  I understand from Rick you drill out the 2 rivets, take out the old bracket and install the new clip with 2 # screws, Phillips head but not ask the length so I bought 4- #6 phillips 1/2".
I really do not want to start drilling on the rivets till I really know the proper procedure.  My Tiger was accepted in the Sandhills Motoring Festival concourse event in Pinehurst on May 29th so need to tackle this now in addition to much detailing.
Any help would be greatly appreciated.
Joel


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20220510/00caf95c/attachment.htm>