<html><head></head><body><div class="yahoo-style-wrap" style="font-family:garamond, new york, times, serif;font-size:16px;"><div dir="ltr" data-setdir="false">Hello all!</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">Pulled up at a buddies garage and while we talking, I noticed the passenger side headlight ring in the wrong position. It was ready to fall off. So I removed it and the clip was broken and just fell out. Dodged a bullet that this did not happen while driving.</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">Rick no longer carries the clip anymore and it is replaced with a screw on clip, screws not included.</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">Has anyone installed these on their cars and has done a write up procedure, Rick has not. I understand from Rick you drill out the 2 rivets, take out the old bracket and install the new clip with 2 # screws, Phillips head but not ask the length so I bought 4- #6 phillips 1/2".</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">I really do not want to start drilling on the rivets till I really know the proper procedure. My Tiger was accepted in the Sandhills Motoring Festival concourse event in Pinehurst on May 29th so need to tackle this now in addition to much detailing.</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">Any help would be greatly appreciated.</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">Joel<br></div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false"><br></div></div></body></html>