[Tigers] LAT Hoods

[Jay]

I should probably add that otherwise it is great.  It is strong.  It otherwise fits perfectly.  The latch area is well built with no signs of stress.  The grilles are all nicely inlaid and look great.  The hood rod holder is doing great.

I can imagine that any of those areas could be problems on other versions.  



> On Aug 18, 2022, at 1:28 PM, Jay <jay.laifman at gmail.com> wrote:
> 
> I don’t know current sources.  But I can add this.  My dad got one, and it’s now on the car.  I love it and would not swap back on the stock one.  If I recall correctly, it is not fiberglass, but possibly a carbon fiber.  However, the arc of the bonnet does not exactly match the arc of the fender line.  The bonnet edge arcs a little higher than the body.
> 
> As I said, it’s not so bad that I would go back to stock.  But if you are looking at options, you should confirm how they fit.  And if there are really good ones out there, I might actually be inclined to buy another one.  So let me know what you find!
> 
> 
> 
>> On Aug 18, 2022, at 12:27 PM, Curt Bowland via Tigers <tigers at autox.team.net <mailto:tigers at autox.team.net>> wrote:
>> 
>> Would appreciate any sources for current LAT fiberglass hoods. 
>> 
>> Thanks,
>> 
>> Curt 
>> _______________________________________________
>> 
>> tigers at autox.team.net <mailto:tigers at autox.team.net>
>> 
>> Donate: http://www.team.net/donate.html <http://www.team.net/donate.html>
>> Archive: http://www.team.net/pipermail/tigers <http://www.team.net/pipermail/tigers> http://autox.team.net/archive <http://autox.team.net/archive>
>> 
>> Unsubscribe: http://autox.team.net/mailman/options/tigers/jay.laifman@gmail.com <http://autox.team.net/mailman/options/tigers/jay.laifman@gmail.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20220818/2a490736/attachment-0001.htm>