[Tigers] Tiger PCV Adapter

[jimdamelio]

Thanks for all the responses.  I know what's original now.Sent from my Galaxy
-------- Original message --------From: Ron Fraser <rfraser at bluefrog.com> Date: 10/8/21  11:56 AM  (GMT-05:00) To: 'jimdamelio' <jimdamelio at verizon.net> Cc: tigers at Autox.Team.Net Subject: RE: [Tigers] Tiger PCV Adapter The short answer is NO.  This picture is from Bob Mannel’s book pg. 4-41. The PCV valve threads into the Adaptor.The pictures you sent – that part could work but not original or correct for the Tiger engine.I don’t believe the original Adaptor is available – it is obsolete. Ford fazed the brass Adaptor part out as a cost reduction, replaced by the PCV hose with 2 right angles in 1965.It is curious that even the MK II Part List shows this Adaptor.  MK II does not use the brass Adaptor part. I do not know when this change took place on the Tiger engine but my F21KA engine has the 2 right angle PCV hose. Ron Fraser From: Tigers <tigers-bounces at autox.team.net> On Behalf Of jimdamelio via TigersSent: Friday, October 08, 2021 9:52 AMTo: tigers at autox.team.netSubject: [Tigers] Tiger PCV Adapter I've attached two pictures and was wondering if this is the same adapter Rootes used on the Tiger.  The early parts book lists the Ford # as 378754.  The Mustang supplier's sell the pictured one for big block cars. Anyone still have their original. Jim D  Sent from my Galaxy 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20211008/2a70e4c1/attachment.htm>