[Tigers] Tiger PCV Adapter

[Ron Fraser]

The short answer is NO.  This picture is from Bob Mannel’s book pg. 4-41.

 

The PCV valve threads into the Adaptor.

The pictures you sent – that part could work but not original or correct for the Tiger engine.

I don’t believe the original Adaptor is available – it is obsolete.

 

Ford fazed the brass Adaptor part out as a cost reduction, replaced by the PCV hose with 2 right angles in 1965.

It is curious that even the MK II Part List shows this Adaptor.  MK II does not use the brass Adaptor part.

 

I do not know when this change took place on the Tiger engine but my F21KA engine has the 2 right angle PCV hose.

 

Ron Fraser

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of jimdamelio via Tigers
Sent: Friday, October 08, 2021 9:52 AM
To: tigers at autox.team.net
Subject: [Tigers] Tiger PCV Adapter

 

I've attached two pictures and was wondering if this is the same adapter Rootes used on the Tiger.  The early parts book lists the Ford # as 378754.  The Mustang supplier's sell the pictured one for big block cars. Anyone still have their original.

 

Jim D

 

 

Sent from my Galaxy

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20211008/a231f514/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PCV.jpg
Type: image/jpeg
Size: 101803 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20211008/a231f514/attachment-0001.jpg>