[Tigers] WANTED: Original Battery Terminal Clamp(s)

[James Lindner]

Ron

Thanks for the thought…but way beyond my technical capabilities. I have a lead on one and still hoping others may speak up with an offer to sell one.

Jim

Sent from my iPad

> On Nov 10, 2021, at 4:01 PM, Ron Fraser <rfraser at bluefrog.com> wrote:
> 
> Jim 
>    This is just a though.
> You might possibly TIG Braze a raised P onto the stamped P clamp.
> Not sure about this I'm not much of a welder.
> 
> I was thinking maybe TIG a brass rod to the shape of the P - sand, file,
> sandblast to get the cast look.
> 
> You would need to talk to an experienced TIG welder about this.
> 
> Ron Fraser
> 
> -----Original Message-----
> From: Tigers <tigers-bounces at autox.team.net> On Behalf Of James Lindner via
> Tigers
> Sent: Tuesday, November 09, 2021 3:28 PM
> To: tigers at autox.team.net
> Subject: [Tigers] WANTED: Original Battery Terminal Clamp(s)
> 
> Hello
> 
> I am looking for an original Battery Terminal Clamp. I need the Positive (P)
> clamp. I will take the N and P clamps, if necessary, although I have my
> original N clamp and strap. I have posted this same Wanted message to the
> CAT Forum and TEAE FB page without success. There are some aftermarket ones
> out there that are close but the P/N are stamped, as opposed to being cast.
> 
> Any out there?
> 
> Thanks
> 
> Jim
> 
> Sent from my iPad
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> 
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
> 
>