[Tigers] WANTED: Original Battery Terminal Clamp(s)
Will Seay
Tigers at embarqmail.com
Tue Nov 9 14:28:58 MST 2021
Just out of curiosity, Jim, how do you expect to attach the cable to the
clamp? The OEM cable is a single piece that goes from the battery in the
trunk to the starter solenoid in the lower right rear of the engine
compartment. That's a long cable. Unless it's made specifically for the
Tiger, you aren't likely to find it. That said, some time ago I saw a
repro of the Tiger battery cable on Ebay. Don't know if it had the correct
"P" or not. And sorry, don't have any contact info for the vendor.
Will - 382001570
Tigers at embarqmail.com
On Tue, Nov 9, 2021 at 3:28 PM James Lindner via Tigers <
tigers at autox.team.net> wrote:
> Hello
>
> I am looking for an original Battery Terminal Clamp. I need the Positive
> (P) clamp. I will take the N and P clamps, if necessary, although I have my
> original N clamp and strap. I have posted this same Wanted message to the
> CAT Forum and TEAE FB page without success. There are some aftermarket ones
> out there that are close but the P/N are stamped, as opposed to being cast.
>
> Any out there?
>
> Thanks
>
> Jim
>
> Sent from my iPad
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/tigers@embarqmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20211109/7d871abd/attachment.htm>
More information about the Tigers
mailing list