[Tigers] tool kit metal plate on trunk floor
Ron Fraser
rfraser at bluefrog.com
Sun Nov 7 09:28:39 MST 2021
Jim
Here is what I have.
The curve follows the contour of the trunk floor @ the back.
Width = .638” Holes = .205” 1.122” apart
Length = 1.97” Bend @ 1.67”
Thickness = .035” after cleaning rust off in Evapo Rust
Ron Fraser
From: Tigers <tigers-bounces at autox.team.net> On Behalf Of James Armstrong via Tigers
Sent: Sunday, November 07, 2021 11:03 AM
To: tigers at autox.team.net
Subject: [Tigers] tool kit metal plate on trunk floor
Hello,
I am nearly done removing the black asphalt-like substance that the FPO used to cover a patch panel in the
extreme right rear of the car.trunk floor. Sadly he painted the rest of the trunk in the pitch-like black s*it.
He removed all the jack/handle clips but also the piece of metal(?) that held the tool roll fixing strap.
Having never seen the metal piece or the strap, would someone be so kind as to describe the metal piece, dimensionally if possible, and the strap/buckle. Over the years, I put together a complete tool roll and have all clips when the trunk is done and in paint. And what is the color of the tool-roll fixing plate when finally installed?
I don't know what I'd do without you folks, really.
Jim Armstrong
Mk 1A
382002083 LRXFE
Code 86
TAC # 0763
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20211107/12af4613/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 58501 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20211107/12af4613/attachment-0001.png>
More information about the Tigers
mailing list