[Tigers] Dashboard Refinish

[Gary]

In about 1979 I was able to chip it off with a small knife and screwdriver.
If its still on yours after all these years are you sure it is factory?  
Most I saw way back when were all
cracking off.
Good luck,
Gary


On 3/15/2021 8:37 AM, Jim D'Amelio via Tigers wrote:
>
> Does anyone know what will remove the factory finish on our 
> dashboards?  I’ve tried stripper, denatured alcohol and lacquer 
> thinner.  Nothing lefts it off. I tried a 1000 watt hair blower, but 
> that only chipped some off where the finish was cracked.  Didn’t 
> really soften it.
>
> Jim D
>
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
>
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20210315/5430ca7d/attachment.htm>