[Tigers] Front Marker Light Question

[Joe Brown]

Thanks for all of the answers.  I'll swap the wires for the front markers.
FYI, Joe Parlanti's LED bulbs work great.

Thanks,
Joe Brown

On Sun, Jun 6, 2021 at 3:33 PM Will Seay <Tigers at embarqmail.com> wrote:

> Joe, you probably do have your lights wired backwards.  I had the same
> problem in the rear with brake and signal reversed.  Should be a simple
> matter to do the wire switch.  Those lights have a pigtail lead that
> connects to the main harness that runs down either side of the engine
> compartment.  Connection to the harness is through barrel connectors.  All
> you have to do is unplug and switch.  you can do it trial and error or look
> up the wire color in the circuit diagram in the workshop manual.
>
> Will - 382001570
> Tigers at embarqmail.com
>
>
> On Sun, Jun 6, 2021 at 3:59 PM Joe Brown <jbbrown1980 at gmail.com> wrote:
>
>> This might be a stupid question but I have just replaced my exterior
>> light bulbs with LEDs from Joe Parlanti.  The main reason I decided to do
>> this was because the incandescent bulbs in my rear brake lights were
>> melting the lenses if I held the brake for very long.
>>
>> Anyway, my front lights have a smaller clear lens and a larger amber.
>> When I turn on my turn signals it is the small clear lights that blink.
>> I'm a little confused because the parts catalog lists the amber side as
>> being the "flasher".  Do I have my front lights wired backwards?
>>
>> Thanks,
>> Joe Brown
>> _______________________________________________
>>
>> tigers at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers
>> http://autox.team.net/archive
>>
>> Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/tigers@embarqmail.com
>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20210606/eb3df899/attachment.htm>