[Tigers] 90 degree oil filter adaptor

[Terry Lawell]

I will do that!

Terry


On 7/3/21, 4:27 PM, Gary wrote:
> When you get this all figured out, how about
> taking some pictures and giving us the
> Summit part numbers.  It’s way past the time
> that I should have replaced the rubber hose
> in my remote setup.
> Gary
>
>
> Sent from my iPhone
>
>> On Jul 3, 2021, at 12:50 PM, Stu via Tigers <tigers at autox.team.net> 
>> wrote:
>>
>> 
>> Yes, Fram ph3600 or Ford FL400 will fit without grinding the engine 
>> mount.
>>
>> On Sat, Jul 3, 2021, 3:41 PM Terry Lawell <tlawell at austin.rr.com 
>> <mailto:tlawell at austin.rr.com>> wrote:
>>
>>     Hi Ron,
>>
>>       It turns out Summit had the right adapter for the kit, the sales
>>     person just didn't know it. They have sent the adapter to me and
>>     it fits
>>     correctly in the block as well as in the kit. The only problem
>>     was the
>>     oil filter they sent me was incorrect - it hits up against the
>>     oil pan.
>>     Is it the ph3600 that is slimmer and fits that kit?
>>       I also found another problem - the oil line from the oil pressure
>>     gauge was cracked and leaking. when I disconnected the oil line
>>     fitting,
>>     I also took off the fitting that goes into the block. It was very
>>     difficult to get off and I am concerned that someone either put a
>>     fitting in there with the wrong threads or stripped the threads when
>>     they installed it. Do you know what size those threads are? It
>>     appears
>>     to be a british standard pipe thread. I had to use whitworth
>>     wrenches to
>>     get both the pressure fitting nut and the fitting to the block
>>     off. Any
>>     info on these fittings would be much appreciated.
>>
>>     Cheers, Terry
>>
>>
>>     On 7/3/21, 7:45 AM, Ron Fraser wrote:
>>     > Terry
>>     >       1st -  I would contact Summit to make sure that oil
>>     filter kit did
>>     > not come with an adaptor or if it is missing from your kit.
>>     > 2nd -  does Summit have the adaptor needed for this kit?
>>     >
>>     > C20Z 6890-C seems to be the Ford part number for the adaptor -
>>     3/4 x16
>>     > thread and 1 1/16 x 12 thread
>>     > You need to check that this is correct for your oil filter kit.
>>     >
>>     >
>>     https://www.npdlink.com/search/products?search_terms=fitting%2Boil%2Bfilter&
>>     > top_parent=200001&year=
>>     >
>>     > see if 6890-A is the part you need.
>>     >
>>     > Ron Fraser
>>     >
>>     > -----Original Message-----
>>     > From: Tigers <tigers-bounces at autox.team.net
>>     <mailto:tigers-bounces at autox.team.net>> On Behalf Of Terry Lawell via
>>     > Tigers
>>     > Sent: Thursday, July 01, 2021 8:34 PM
>>     > To: tigers at autox.team.net <mailto:tigers at autox.team.net>
>>     > Subject: [Tigers] 90 degree oil filter adaptor
>>     >
>>     > I purchased a 90 degree oil filter adapter from Summit Racing
>>     and when it
>>     > arrived I realized it did not have the adapter for the block,
>>     though the
>>     > salesman told me it came with it. Does anyone know where I can
>>     get the
>>     > adapter? I think it is 1.16" threads to the block and 13/16"
>>     threads to the
>>     > adapter.
>>     >
>>     > Cheers, Terry
>>     > _______________________________________________
>>     >
>>     > tigers at autox.team.net <mailto:tigers at autox.team.net>
>>     >
>>     > Donate: http://www.team.net/donate.html
>>     > Archive: http://www.team.net/pipermail/tigers
>>     http://autox.team.net/archive
>>     >
>>     > Unsubscribe:
>>     > http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
>>     >
>>     >
>>     >
>>
>>     _______________________________________________
>>
>>     tigers at autox.team.net <mailto:tigers at autox.team.net>
>>
>>     Donate: http://www.team.net/donate.html
>>     Archive: http://www.team.net/pipermail/tigers
>>     http://autox.team.net/archive
>>
>>     Unsubscribe:
>>     http://autox.team.net/mailman/options/tigers/sabre2tgr@gmail.com
>>
>>
>> _______________________________________________
>>
>> tigers at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers 
>> http://autox.team.net/archive
>>
>> Unsubscribe: 
>> http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
>>
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20210703/944437ef/attachment-0001.htm>