[Tigers] 90 degree oil filter adaptor

[Gary]

When you get this all figured out, how about
taking some pictures and giving us the
Summit part numbers.  It’s way past the time 
that I should have replaced the rubber hose 
in my remote setup.
Gary


Sent from my iPhone

> On Jul 3, 2021, at 12:50 PM, Stu via Tigers <tigers at autox.team.net> wrote:
> 
> 
> Yes, Fram ph3600 or Ford FL400 will fit without grinding the engine mount.
> 
>> On Sat, Jul 3, 2021, 3:41 PM Terry Lawell <tlawell at austin.rr.com> wrote:
>> Hi Ron,
>> 
>>   It turns out Summit had the right adapter for the kit, the sales 
>> person just didn't know it. They have sent the adapter to me and it fits 
>> correctly in the block as well as in the kit. The only problem was the 
>> oil filter they sent me was incorrect - it hits up against the oil pan. 
>> Is it the ph3600 that is slimmer and fits that kit?
>>   I also found another problem - the oil line from the oil pressure 
>> gauge was cracked and leaking. when I disconnected the oil line fitting, 
>> I also took off the fitting that goes into the block. It was very 
>> difficult to get off and I am concerned that someone either put a 
>> fitting in there with the wrong threads or stripped the threads when 
>> they installed it. Do you know what size those threads are? It appears 
>> to be a british standard pipe thread. I had to use whitworth wrenches to 
>> get both the pressure fitting nut and the fitting to the block off. Any 
>> info on these fittings would be much appreciated.
>> 
>> Cheers, Terry
>> 
>> 
>> On 7/3/21, 7:45 AM, Ron Fraser wrote:
>> > Terry
>> >       1st -  I would contact Summit to make sure that oil filter kit did
>> > not come with an adaptor or if it is missing from your kit.
>> > 2nd -  does Summit have the adaptor needed for this kit?
>> >
>> > C20Z 6890-C seems to be the Ford part number for the adaptor - 3/4 x16
>> > thread and 1 1/16 x 12 thread
>> > You need to check that this is correct for your oil filter kit.
>> >
>> > https://www.npdlink.com/search/products?search_terms=fitting%2Boil%2Bfilter&
>> > top_parent=200001&year=
>> >
>> > see if 6890-A is the part you need.
>> >
>> > Ron Fraser
>> >
>> > -----Original Message-----
>> > From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Terry Lawell via
>> > Tigers
>> > Sent: Thursday, July 01, 2021 8:34 PM
>> > To: tigers at autox.team.net
>> > Subject: [Tigers] 90 degree oil filter adaptor
>> >
>> > I purchased a 90 degree oil filter adapter from Summit Racing and when it
>> > arrived I realized it did not have the adapter for the block, though the
>> > salesman told me it came with it. Does anyone know where I can get the
>> > adapter? I think it is 1.16" threads to the block and 13/16" threads to the
>> > adapter.
>> >
>> > Cheers, Terry
>> > _______________________________________________
>> >
>> > tigers at autox.team.net
>> >
>> > Donate: http://www.team.net/donate.html
>> > Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
>> >
>> > Unsubscribe:
>> > http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
>> >
>> >
>> >
>> 
>> _______________________________________________
>> 
>> tigers at autox.team.net
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
>> 
>> Unsubscribe: http://autox.team.net/mailman/options/tigers/sabre2tgr@gmail.com
>> 
>> 
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20210703/0ee99fa9/attachment.htm>